new theme

.p10k.zsh

@@ -1,7 +1,7 @@
-# Generated by Powerlevel10k configuration wizard on 2019-10-07 at 11:21 EDT.
+# Generated by Powerlevel10k configuration wizard on 2019-12-18 at 22:19 EST.
-# Based on romkatv/powerlevel10k/config/p10k-classic.zsh, checksum 61305.
+# Based on romkatv/powerlevel10k/config/p10k-classic.zsh, checksum 58903.
-# Wizard options: powerline, classic, dark, angled separators, sharp heads, flat tails,
+# Wizard options: powerline, classic, dark, time, angled separators, blurred heads,
-# 2 lines, disconnected, full frame, sparse, concise.
+# sharp tails, 2 lines, solid, no frame, sparse, fluent.
 # Type `p10k configure` to generate another config.
 #
 # Config for Powerlevel10k with classic powerline prompt style. Type `p10k configure` to generate
@@ -11,17 +11,16 @@
 #
 #   for i in {0..255}; do print -Pn "%${i}F${(l:3::0:)i}%f " ${${(M)$((i%8)):#7}:+$'\n'}; done
 
-if [[ -o 'aliases' ]]; then
+# Temporarily change options.
-  # Temporarily disable aliases.
+'builtin' 'local' '-a' 'p10k_config_opts'
-  'builtin' 'unsetopt' 'aliases'
+[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
-  local p9k_classic_restore_aliases=1
+[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
-else
+[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
-  local p9k_classic_restore_aliases=0
+'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
-fi
 
 () {
   emulate -L zsh
-  setopt no_unset
+  setopt no_unset extended_glob
   zmodload zsh/langinfo
   if [[ ${langinfo[CODESET]:-} != (utf|UTF)(-|)8 ]]; then
     local LC_ALL=${${(@M)$(locale -a):#*.(utf|UTF)(-|)8}[1]:-en_US.UTF-8}
@@ -32,14 +31,14 @@ fi
   unset -m 'POWERLEVEL9K_*'
 
   # The list of segments shown on the left. Fill it with the most important segments.
-  typeset -ga POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
       # =========================[ Line #1 ]=========================
       # os_icon               # os identifier
       dir                     # current directory
       vcs                     # git status
       # =========================[ Line #2 ]=========================
       newline
-      # prompt_char           # prompt symbol
+      prompt_char             # prompt symbol
   )
 
   # The list of segments shown on the right. Fill it with less important segments.
@@ -51,6 +50,7 @@ fi
       status                  # exit code of the last command
       command_execution_time  # duration of the last command
       background_jobs         # presence of background jobs
+      direnv                  # direnv status (https://direnv.net/)
       virtualenv              # python virtual environment (https://docs.python.org/3/library/venv.html)
       anaconda                # conda environment (https://conda.io/)
       pyenv                   # python environment (https://github.com/pyenv/pyenv)
@@ -60,18 +60,27 @@ fi
       # node_version          # node.js version
       # go_version            # go version (https://golang.org)
       # rust_version          # rustc version (https://www.rust-lang.org)
+      # dotnet_version        # .NET version (https://dotnet.microsoft.com)
       rbenv                   # ruby version from rbenv (https://github.com/rbenv/rbenv)
       rvm                     # ruby version from rvm (https://rvm.io)
       kubecontext             # current kubernetes context (https://kubernetes.io/)
       terraform               # terraform workspace (https://www.terraform.io)
-      context                 # user@host
+      aws                     # aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html)
+      # aws_eb_env            # aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/)
+      # azure                 # azure account name (https://docs.microsoft.com/en-us/cli/azure)
+      context                 # user@hostname
       nordvpn                 # nordvpn connection status, linux only (https://nordvpn.com/)
       ranger                  # ranger shell (https://github.com/ranger/ranger)
+      vi_mode                 # vi mode (you don't need this if you've enabled prompt_char)
+      # vpn_ip                # virtual private network indicator
+      # ram                   # free RAM
+      # load                  # CPU load
+      time                    # current time
       # =========================[ Line #2 ]=========================
       newline
       # public_ip             # public IP address
+      # proxy                 # system-wide http/https/ftp proxy
       # battery               # internal battery
-       time                  # current time
       # example               # example user-defined segment (see prompt_example function below)
   )
 
@@ -114,11 +123,12 @@ fi
   #   Awesome-Terminal Fonts (regular) | awesome-fontconfig
   #   Awesome-Terminal Fonts (patched) | awesome-patched
   #   Nerd Fonts                       | nerdfont-complete
+  #   Other                            | compatible
   #
-  # If this looks overwhelming, install a font from https://github.com/ryanoasis/nerd-fonts
+  # If this looks overwhelming, either stick with a preinstalled system font and set
-  # and set POWERLEVEL9K_MODE=nerdfont-complete. "Meslo LG S Regular Nerd Font Complete Mono" from
+  # POWERLEVEL9K_MODE=compatible, or install the recommended Powerlevel10k font from
-  # https://github.com/ryanoasis/nerd-fonts/tree/master/patched-fonts/Meslo/S/Regular/complete is
+  # https://github.com/romkatv/powerlevel10k/#recommended-meslo-nerd-font-patched-for-powerlevel10k
-  # very good.
+  # and set POWERLEVEL9K_MODE=nerdfont-complete.
   typeset -g POWERLEVEL9K_MODE=powerline
 
   # When set to true, icons appear before content on both sides of the prompt. When set
@@ -139,19 +149,19 @@ fi
 
   # Connect left prompt lines with these symbols. You'll probably want to use the same color
   # as POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND below.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX='%240F╭─'
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX='%240F├─'
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX='%240F╰─'
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
   # Connect right prompt lines with these symbols.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%240F─╮'
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%240F─┤'
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%240F─╯'
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=
 
   # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
   # '─'. The last two make it easier to see the alignment between left and right prompt and to
   # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
   # for more compact prompt if using using this option.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='─'
   typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
   if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
     # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
@@ -175,13 +185,13 @@ fi
   # Separator between different-color segments on the right.
   typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR='\uE0B2'
   # The right end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='▓▒░'
   # The left end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='░▒▓'
   # The left end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL='\uE0B2'
   # The right end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL='\uE0B0'
   # Left prompt terminator for lines without any segments.
   typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
 
@@ -195,15 +205,18 @@ fi
   # Transparent background.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_BACKGROUND=
   # Green prompt symbol if the last command succeeded.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS}_FOREGROUND=76
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=76
   # Red prompt symbol if the last command failed.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS}_FOREGROUND=196
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
   # Default prompt symbol.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
   # Prompt symbol in command vi mode.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
   # Prompt symbol in visual vi mode.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='Ⅴ'
+  # Prompt symbol in overwrite vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
   # No line terminator if prompt_char is the last segment.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
   # No line introducer if prompt_char is the first segment.
@@ -226,14 +239,38 @@ fi
   typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=39
   # Display anchor directory segments in bold.
   typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=true
-  # Don't shorten directories that contain files matching this pattern. They are anchors.
+  # Don't shorten directories that contain any of these files. They are anchors.
-  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER='(.shorten_folder_marker|.bzr|CVS|.git|.hg|.svn|.terraform|.citc)'
+  local anchor_files=(
+    .bzr
+    .citc
+    .git
+    .hg
+    .node-version
+    .python-version
+    .ruby-version
+    .shorten_folder_marker
+    .svn
+    .terraform
+    CVS
+    Cargo.toml
+    composer.json
+    go.mod
+    package.json
+  )
+  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
   # Don't shorten this many last directory segments. They are anchors.
   typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
   # Shorten directory if it's longer than this even if there is space for it. The value can
   # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
-  # directory will be shortened only when prompt doesn't fit.
+  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
+  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
   typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
+  # many columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
+  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
   # If set to true, embed a hyperlink into the directory. Useful for quickly
   # opening a directory in the file manager simply by clicking the link.
   # Can also be handy when the directory is shortened, as it allows you to see
@@ -242,8 +279,9 @@ fi
 
   # Enable special styling for non-writable directories.
   typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
-  # Show this icon when the current directory is not writable. Empty for no icon.
+  # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
-  # typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # above must be set to true for this parameter to have effect.
+  typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='∅'
 
   # Custom prefix.
   # typeset -g POWERLEVEL9K_DIR_PREFIX='%246Fin '
@@ -287,74 +325,115 @@ fi
   #####################################[ vcs: git status ]######################################
   # Branch icon. Set this parameter to '\uF126 ' for the popular Powerline branch icon.
   typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
+  POWERLEVEL9K_VCS_BRANCH_ICON=${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}
 
   # Untracked files icon. It's really a question mark, your font isn't broken.
   # Change the value of this parameter to show a different icon.
   typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
+  POWERLEVEL9K_VCS_UNTRACKED_ICON=${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}
 
-  # Git status: feature:master#tag ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  # Formatter for Git status.
   #
-  # You can edit the lines below to customize how Git status looks.
+  # Example output: master ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
   #
-  # VCS_STATUS parameters are set by gitstatus plugin. See reference:
+  # You can edit the function to customize how Git status looks.
+  #
+  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
   # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
-  local vcs=''
+  function my_git_formatter() {
-  # If on a branch...
+    emulate -L zsh
-  vcs+='${${VCS_STATUS_LOCAL_BRANCH:+%76F'${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}
+
-  # If branch name is at most 32 characters long, show it in full.
+    if [[ -n $P9K_CONTENT ]]; then
-  vcs+='${${${$(($#VCS_STATUS_LOCAL_BRANCH<=32)):#0}:+${VCS_STATUS_LOCAL_BRANCH//\%/%%}}'
+      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
-  # If branch name is over 32 characters long, show the first 12 … the last 12.
+      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
-  vcs+=':-${VCS_STATUS_LOCAL_BRANCH[1,12]//\%/%%}%28F…%76F${VCS_STATUS_LOCAL_BRANCH[-12,-1]//\%/%%}}}'
+      typeset -g my_git_format=$P9K_CONTENT
-  # '@72f5c8a' if not on a branch.
+      return
-  vcs+=':-%246F@%76F${VCS_STATUS_COMMIT[1,8]}}'
+    fi
-  # ':master' if the tracking branch name differs from local branch.
+
-  vcs+='${${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH}:+%246F:%76F${VCS_STATUS_REMOTE_BRANCH//\%/%%}}'
+    if (( $1 )); then
-  # '#tag' if on a tag.
+      # Styling for up-to-date Git status.
-  vcs+='${VCS_STATUS_TAG:+%246F#%76F${VCS_STATUS_TAG//\%/%%}}'
+      local       meta='%246F'  # grey foreground
+      local      clean='%76F'   # green foreground
+      local   modified='%178F'  # yellow foreground
+      local  untracked='%39F'   # blue foreground
+      local conflicted='%196F'  # red foreground
+    else
+      # Styling for incomplete and stale Git status.
+      local       meta='%244F'  # grey foreground
+      local      clean='%244F'  # grey foreground
+      local   modified='%244F'  # grey foreground
+      local  untracked='%244F'  # grey foreground
+      local conflicted='%244F'  # grey foreground
+    fi
+
+    local res
+    local where  # branch name, tag or commit
+    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
+      res+="${clean}${POWERLEVEL9K_VCS_BRANCH_ICON}"
+      where=${(V)VCS_STATUS_LOCAL_BRANCH}
+    elif [[ -n $VCS_STATUS_TAG ]]; then
+      res+="${meta}#"
+      where=${(V)VCS_STATUS_TAG}
+    else
+      res+="${meta}@"
+      where=${VCS_STATUS_COMMIT[1,8]}
+    fi
+
+    # If local branch name or tag is at most 32 characters long, show it in full.
+    # Otherwise show the first 12 … the last 12.
+    (( $#where > 32 )) && where[13,-13]="…"
+    res+="${clean}${where//\%/%%}"  # escape %
+
+    # Show tracking branch name if it differs from local branch.
+    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
+      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"  # escape %
+    fi
+
     # ⇣42 if behind the remote.
-  vcs+='${${VCS_STATUS_COMMITS_BEHIND:#0}:+ %76F⇣${VCS_STATUS_COMMITS_BEHIND}}'
+    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
     # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
-  # If you want '⇣42 ⇡42' instead, replace '${${(M)VCS_STATUS_COMMITS_BEHIND:#0}:+ }' with ' '.
+    (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
-  vcs+='${${VCS_STATUS_COMMITS_AHEAD:#0}:+${${(M)VCS_STATUS_COMMITS_BEHIND:#0}:+ }%76F⇡${VCS_STATUS_COMMITS_AHEAD}}'
+    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
     # *42 if have stashes.
-  vcs+='${${VCS_STATUS_STASHES:#0}:+ %76F*${VCS_STATUS_STASHES}}'
+    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
     # 'merge' if the repo is in an unusual state.
-  vcs+='${VCS_STATUS_ACTION:+ %196F${VCS_STATUS_ACTION//\%/%%}}'
+    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
     # ~42 if have merge conflicts.
-  vcs+='${${VCS_STATUS_NUM_CONFLICTED:#0}:+ %196F~${VCS_STATUS_NUM_CONFLICTED}}'
+    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
     # +42 if have staged changes.
-  vcs+='${${VCS_STATUS_NUM_STAGED:#0}:+ %178F+${VCS_STATUS_NUM_STAGED}}'
+    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
     # !42 if have unstaged changes.
-  vcs+='${${VCS_STATUS_NUM_UNSTAGED:#0}:+ %178F!${VCS_STATUS_NUM_UNSTAGED}}'
+    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
     # ?42 if have untracked files. It's really a question mark, your font isn't broken.
-  # See POWERLEVEL9K_VCS_UNTRACKED_ICON below if you want to use a different icon.
+    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
     # Remove the next line if you don't want to see untracked files at all.
-  vcs+='${${VCS_STATUS_NUM_UNTRACKED:#0}:+ %39F'${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}'${VCS_STATUS_NUM_UNTRACKED}}'
+    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
-  # If P9K_CONTENT is not empty, leave it unchanged. It's either "loading" or from vcs_info.
+
-  vcs="\${P9K_CONTENT:-$vcs}"
+    typeset -g my_git_format=$res
+  }
+  functions -M my_git_formatter 2>/dev/null
 
   # Disable the default Git status formatting.
   typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
   # Install our own Git status formatter.
-  typeset -g POWERLEVEL9K_VCS_{CLEAN,UNTRACKED,MODIFIED}_CONTENT_EXPANSION=$vcs
+  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
-  # When Git status is being refreshed asynchronously, display the last known repo status in grey.
+  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
-  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION=${${vcs//\%f}//\%<->F}
   # Enable counters for staged, unstaged, etc.
   typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1
 
   # Icon color.
   typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=76
+  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=244
   # Custom icon.
   typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_VCS_PREFIX='%246Fon '
+  typeset -g POWERLEVEL9K_VCS_PREFIX='%246Fon '
 
   # Show status of repositories of these types. You can add svn and/or hg if you are
   # using them. If you do, your prompt may become slow even when your current directory
   # isn't in an svn or hg reposotiry.
   typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)
 
-  typeset -g POWERLEVEL9K_VCS_LOADING_FOREGROUND=244
   # These settings are used for respositories other than Git or when gitstatusd fails and
   # Powerlevel10k has to fall back to using vcs_info.
   typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=76
@@ -368,7 +447,7 @@ fi
 
   # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
   # it will signify success by turning green.
-  typeset -g POWERLEVEL9K_STATUS_OK=true
+  typeset -g POWERLEVEL9K_STATUS_OK=false
   typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70
   typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
 
@@ -380,25 +459,24 @@ fi
 
   # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
   # it will signify error by turning red.
-  typeset -g POWERLEVEL9K_STATUS_ERROR=true
+  typeset -g POWERLEVEL9K_STATUS_ERROR=false
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when the last command was terminated by a signal.
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   ###################[ command_execution_time: duration of the last command ]###################
-  # Background color.
   # Show duration of the last command if takes longer than this many seconds.
   typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
   # Show this many fractional digits. Zero means round to seconds.
@@ -410,7 +488,7 @@ fi
   # Custom icon.
   typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%246Ftook '
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%246Ftook '
 
   #######################[ background_jobs: presence of background jobs ]#######################
   # Don't show the number of background jobs.
@@ -418,7 +496,13 @@ fi
   # Background jobs color.
   typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=37
   # Icon to show when there are background jobs.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='≡'
+
+  #######################[ direnv: direnv status (https://direnv.net/) ]########################
+  # Direnv color.
+  typeset -g POWERLEVEL9K_DIRENV_FOREGROUND=178
+  # Icon to show when direnv is active.
+  typeset -g POWERLEVEL9K_DIRENV_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'
 
   ##########[ nordvpn: nordvpn connection status, linux only (https://nordvpn.com/) ]###########
   # NordVPN connection indicator color.
@@ -433,26 +517,62 @@ fi
   # Ranger shell color.
   typeset -g POWERLEVEL9K_RANGER_FOREGROUND=178
   # Custom icon.
-  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲'
 
-  ####################################[ context: user@host ]####################################
+  ###########[ vi_mode: vi mode (you don't need this if you've enabled prompt_char) ]###########
+  # Text and color for normal (a.k.a. command) vi mode.
+  typeset -g POWERLEVEL9K_VI_COMMAND_MODE_STRING=NORMAL
+  typeset -g POWERLEVEL9K_VI_MODE_NORMAL_FOREGROUND=106
+  # Text and color for visual vi mode.
+  typeset -g POWERLEVEL9K_VI_VISUAL_MODE_STRING=VISUAL
+  typeset -g POWERLEVEL9K_VI_MODE_VISUAL_FOREGROUND=68
+  # Text and color for overtype (a.k.a. overwrite and replace) vi mode.
+  typeset -g POWERLEVEL9K_VI_OVERWRITE_MODE_STRING=OVERTYPE
+  typeset -g POWERLEVEL9K_VI_MODE_OVERWRITE_FOREGROUND=172
+  # Text and color for insert vi mode.
+  typeset -g POWERLEVEL9K_VI_INSERT_MODE_STRING=
+  typeset -g POWERLEVEL9K_VI_MODE_INSERT_FOREGROUND=66
+
+  # Custom icon.
+  typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲'
+
+  ######################################[ ram: free RAM ]#######################################
+  # RAM color.
+  typeset -g POWERLEVEL9K_RAM_FOREGROUND=66
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_RAM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ######################################[ load: CPU load ]######################################
+  # Show average CPU load over this many last minutes. Valid values are 1, 5 and 15.
+  typeset -g POWERLEVEL9K_LOAD_WHICH=5
+  # Load color when load is under 50%.
+  typeset -g POWERLEVEL9K_LOAD_NORMAL_FOREGROUND=66
+  # Load color when load is between 50% and 70%.
+  typeset -g POWERLEVEL9K_LOAD_WARNING_FOREGROUND=178
+  # Load color when load is over 70%.
+  typeset -g POWERLEVEL9K_LOAD_CRITICAL_FOREGROUND=166
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_LOAD_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  ##################################[ context: user@hostname ]##################################
   # Default context color.
   typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=180
   # Default context format: %n is username, %m is hostname.
-  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'
+  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n%246F at %180F%m'
 
   # Context color when running with privileges.
   typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=178
-  # Context format when running with privileges: %n is username, %m is hostname.
+  # Context format when running with privileges: %n is username, %m is hostname, %B for bold.
-  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n%246F at %227F%m'
 
   # Don't show context unless running with privileges or in SSH.
+  # Tip: Remove the next line to always show context.
   typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%246Fwith '
+  typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%246Fwith '
 
   ###[ virtualenv: python virtual environment (https://docs.python.org/3/library/venv.html) ]###
   # Python virtual environment color.
@@ -530,6 +650,14 @@ fi
   # Custom icon.
   # typeset -g POWERLEVEL9K_RUST_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
+  ###############[ dotnet_version: .NET version (https://dotnet.microsoft.com) ]################
+  # .NET version color.
+  typeset -g POWERLEVEL9K_DOTNET_VERSION_FOREGROUND=134
+  # Show .NET version only when in a .NET project subdirectory.
+  typeset -g POWERLEVEL9K_DOTNET_VERSION_PROJECT_ONLY=true
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_DOTNET_VERSION_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
   #############[ rbenv: ruby version from rbenv (https://github.com/rbenv/rbenv) ]##############
   # Rbenv color.
   typeset -g POWERLEVEL9K_RBENV_FOREGROUND=168
@@ -552,7 +680,51 @@ fi
   # Terraform color.
   typeset -g POWERLEVEL9K_TERRAFORM_FOREGROUND=38
   # Custom icon.
-  # typeset -g POWERLEVEL9K_TERRAFORM_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_TERRAFORM_VISUAL_IDENTIFIER_EXPANSION='tf'
+
+  #[ aws: aws profile (https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) ]#
+  # AWS profile color.
+  typeset -g POWERLEVEL9K_AWS_DEFAULT_FOREGROUND=208
+  # POWERLEVEL9K_AWS_CLASSES is an array with even number of elements. The first element
+  # in each pair defines a pattern against which the current AWS profile gets matched.
+  # More specifically, it's P9K_CONTENT prior to the application of context expansion (see below)
+  # that gets matched. If you unset all POWERLEVEL9K_AWS_*CONTENT_EXPANSION parameters,
+  # you'll see this value in your prompt. The second element of each pair in
+  # POWERLEVEL9K_AWS_CLASSES defines the context class. Patterns are tried in order. The
+  # first match wins.
+  #
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_AWS_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       DEFAULT)
+  #
+  # If your current AWS profile is "company_test", its class is TEST
+  # because "company_test" doesn't match the pattern '*prod*' but does match '*test*'.
+  #
+  # You can define different colors, icons and content expansions for different classes:
+  #
+  #   typeset -g POWERLEVEL9K_AWS_TEST_FOREGROUND=28
+  #   typeset -g POWERLEVEL9K_AWS_TEST_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  #   typeset -g POWERLEVEL9K_AWS_TEST_CONTENT_EXPANSION='> ${P9K_CONTENT} <'
+  typeset -g POWERLEVEL9K_AWS_CLASSES=(
+      # '*prod*'  PROD    # These values are examples that are unlikely
+      # '*test*'  TEST    # to match your needs. Customize them as needed.
+      '*'       DEFAULT)
+  # typeset -g POWERLEVEL9K_AWS_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  #[ aws_eb_env: aws elastic beanstalk environment (https://aws.amazon.com/elasticbeanstalk/) ]#
+  # AWS Elastic Beanstalk environment color.
+  typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=70
+  # Custom icon.
+  typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='eb'
+
+  ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
+  # Azure account name color.
+  typeset -g POWERLEVEL9K_AZURE_FOREGROUND=32
+  # Custom icon.
+  typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='az'
 
   #############[ kubecontext: current kubernetes context (https://kubernetes.io/) ]#############
   # Kubernetes context classes for the purpose of using different colors, icons and expansions with
@@ -566,7 +738,14 @@ fi
   # POWERLEVEL9K_KUBECONTEXT_CLASSES defines the context class. Patterns are tried in order. The
   # first match wins.
   #
-  # For example, if your current kubernetes context is "deathray-testing/default", its class is TEST
+  # For example, given these settings:
+  #
+  #   typeset -g POWERLEVEL9K_KUBECONTEXT_CLASSES=(
+  #     '*prod*'  PROD
+  #     '*test*'  TEST
+  #     '*'       DEFAULT)
+  #
+  # If your current kubernetes context is "deathray-testing/default", its class is TEST
   # because "deathray-testing/default" doesn't match the pattern '*prod*' but does match '*test*'.
   #
   # You can define different colors, icons and content expansions for different classes:
@@ -579,10 +758,11 @@ fi
       # '*test*'  TEST    # to match your needs. Customize them as needed.
       '*'       DEFAULT)
   typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=134
-  # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='○'
 
   # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
-  # segment.
+  # segment. Parameter expansions are very flexible and fast, too. See reference:
+  # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
   #
   # Within the expansion the following parameters are always available:
   #
@@ -596,7 +776,8 @@ fi
   #                              in the output of `kubectl config get-contexts`. If there is no
   #                              namespace, the parameter is set to "default".
   #
-  # If the context points to GKE or EKS, the following extra parameters are available:
+  # If the context points to Google Kubernetes Engine (GKE) or Elastic Kubernetes Service (EKS),
+  # the following extra parameters are available:
   #
   # - P9K_KUBECONTEXT_CLOUD_NAME     Either "gke" or "eks".
   # - P9K_KUBECONTEXT_CLOUD_ACCOUNT  Account/project ID.
@@ -617,14 +798,14 @@ fi
   #   - P9K_KUBECONTEXT_CLOUD_ACCOUNT=123456789012
   #   - P9K_KUBECONTEXT_CLOUD_ZONE=us-east-1
   #   - P9K_KUBECONTEXT_CLOUD_CLUSTER=my-cluster-01
-  #
+  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION=
-  # The expansion below will show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back
+  # Show P9K_KUBECONTEXT_CLOUD_CLUSTER if it's not empty and fall back to P9K_KUBECONTEXT_NAME.
-  # to P9K_KUBECONTEXT_NAME. Parameter expansions are very flexible and fast, too. See reference:
+  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}'
-  # http://zsh.sourceforge.net/Doc/Release/Expansion.html#Parameter-Expansion.
+  # Append the current context's namespace if it's not "default".
-  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION='${P9K_KUBECONTEXT_CLOUD_CLUSTER:-${P9K_KUBECONTEXT_NAME}}'
+  POWERLEVEL9K_KUBECONTEXT_DEFAULT_CONTENT_EXPANSION+='${${:-/$P9K_KUBECONTEXT_NAMESPACE}:#/default}'
 
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%246Fat '
+  typeset -g POWERLEVEL9K_KUBECONTEXT_PREFIX='%246Fat '
 
   ###############################[ public_ip: public IP address ]###############################
   # Public IP color.
@@ -632,20 +813,33 @@ fi
   # Custom icon.
   # typeset -g POWERLEVEL9K_PUBLIC_IP_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
+  ########################[ vpn_ip: virtual private network indicator ]#########################
+  # VPN IP color.
+  typeset -g POWERLEVEL9K_VPN_IP_FOREGROUND=81
+  # When on VPN, show just an icon without the IP address.
+  typeset -g POWERLEVEL9K_VPN_IP_CONTENT_EXPANSION=
+  # Regular expression for the VPN network interface. Run ifconfig while on VPN to see the
+  # name of the interface.
+  typeset -g POWERLEVEL9K_VPN_IP_INTERFACE='(wg|(.*tun))[0-9]*'
+  # Icon to show when on VPN.
+  typeset -g POWERLEVEL9K_VPN_IP_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'
+
+  #########################[ proxy: system-wide http/https/ftp proxy ]##########################
+  # Proxy color.
+  typeset -g POWERLEVEL9K_PROXY_FOREGROUND=68
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_PROXY_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
   ################################[ battery: internal battery ]#################################
   # Show battery in red when it's below this level and not connected to power supply.
   typeset -g POWERLEVEL9K_BATTERY_LOW_THRESHOLD=20
   typeset -g POWERLEVEL9K_BATTERY_LOW_FOREGROUND=160
-  # Show battery in green when it's charging.
+  # Show battery in green when it's charging or fully charged.
-  typeset -g POWERLEVEL9K_BATTERY_CHARGING_FOREGROUND=2
+  typeset -g POWERLEVEL9K_BATTERY_{CHARGING,CHARGED}_FOREGROUND=70
-  # Show battery in yellow when not connected to power supply.
+  # Show battery in yellow when it's discharging.
   typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=178
   # Battery pictograms going from low to high level of charge.
-  typeset -g POWERLEVEL9K_BATTERY_STAGES='▁▂▃▄▅▆▇'
+  typeset -g POWERLEVEL9K_BATTERY_STAGES=('%K{232}▁' '%K{232}▂' '%K{232}▃' '%K{232}▄' '%K{232}▅' '%K{232}▆' '%K{232}▇' '%K{232}█')
-  # Display battery pictogram without background.
-  typeset -g POWERLEVEL9K_BATTERY_VISUAL_IDENTIFIER_EXPANSION='%k${P9K_VISUAL_IDENTIFIER}'
-  # Don't show battery when it's fully charged and connected to power supply.
-  typeset -g POWERLEVEL9K_BATTERY_CHARGED_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
   # Don't show the remaining time to charge/discharge.
   typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
 
@@ -661,7 +855,7 @@ fi
   # Custom icon.
   typeset -g POWERLEVEL9K_TIME_VISUAL_IDENTIFIER_EXPANSION=
   # Custom prefix.
-  # typeset -g POWERLEVEL9K_TIME_PREFIX='%246Fat '
+  typeset -g POWERLEVEL9K_TIME_PREFIX='%246Fat '
 
   # Example of a user-defined prompt segment. Function prompt_example will be called on every
   # prompt if `example` prompt segment is added to POWERLEVEL9K_LEFT_PROMPT_ELEMENTS or
@@ -672,10 +866,56 @@ fi
     p10k segment -f 208 -i '⭐' -t 'hello, %n'
   }
 
-  # User-defined prompt segments can be customized the same way as built-in segments.
+  # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job
-  typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=208
+  # is to generate the prompt segment for display in instant prompt. See
-  typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='${P9K_VISUAL_IDENTIFIER}'
+  # https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
+  #
+  # Powerlevel10k will call instant_prompt_* at the same time as the regular prompt_* function
+  # and will record all `p10k segment` calls it makes. When displaying instant prompt, Powerlevel10k
+  # will replay these calls without actually calling instant_prompt_*. It is imperative that
+  # instant_prompt_* always makes the same `p10k segment` calls regardless of environment. If this
+  # rule is not observed, the content of instant prompt will be incorrect.
+  #
+  # Usually, you should either not define instant_prompt_* or simply call prompt_* from it. If
+  # instant_prompt_* is not defined for a segment, the segment won't be shown in instant prompt.
+  function instant_prompt_example() {
+    # Since prompt_example always makes the same `p10k segment` calls, we can call it from
+    # instant_prompt_example. This will give us the same `example` prompt segment in the instant
+    # and regular prompts.
+    prompt_example
   }
 
-(( ! p9k_classic_restore_aliases )) || setopt aliases
+  # User-defined prompt segments can be customized the same way as built-in segments.
-'builtin' 'unset' 'p9k_classic_restore_aliases'
+  # typeset -g POWERLEVEL9K_EXAMPLE_FOREGROUND=208
+  # typeset -g POWERLEVEL9K_EXAMPLE_VISUAL_IDENTIFIER_EXPANSION='⭐'
+
+  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
+  # when accepting a command line. Supported values:
+  #
+  #   - off:      Don't change prompt when accepting a command line.
+  #   - always:   Trim down prompt when accepting a command line.
+  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
+  #               typed after changing current working directory.
+  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=off
+
+  # Instant prompt mode.
+  #
+  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
+  #              it incompatible with your zsh configuration files.
+  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
+  #              during zsh initialization. Choose this if you've read and understood
+  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
+  #   - verbose: Enable instant prompt and print a warning when detecting console output during
+  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
+  #              seen the warning, or if you are unsure what this all means.
+  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
+
+  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
+  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
+  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
+  # really need it.
+  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
+}
+
+(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
+'builtin' 'unset' 'p10k_config_opts'