mirror of
https://github.com/google/pebble.git
synced 2025-03-26 13:09:06 +00:00
150 lines
4 KiB
Markdown
150 lines
4 KiB
Markdown
#### Preparation
|
|
|
|
##### Accessories
|
|
|
|
You need,
|
|
* 3.3V power supply. You can use bread board power (+5V, +3.3V). I used LM317 like this;
|
|
* Use [LM317](http://www.ti.com/lit/ds/symlink/lm317.pdf)
|
|
* R1 = 330 Ohm, R2 = 545 Ohm (1K + 1.2K in parallel)
|
|
* 5V 2A adaptor
|
|
* USB to RS-232 Serial + RS-232 Serial to Digital or USB-to-RS232 TTL converter
|
|
|
|
#### Toolchain
|
|
|
|
Reference [Toolchain](https://github.com/esp8266/esp8266-wiki/wiki/Toolchain) page.
|
|
|
|
I've slightly changed the step to use SDK from Espressif official SDK
|
|
(https://github.com/espressif/esp_iot_rtos_sdk)
|
|
|
|
##### Toolchain:
|
|
|
|
dependencies for x86
|
|
```
|
|
sudo apt-get install git autoconf build-essential gperf \
|
|
bison flex texinfo libtool libncurses5-dev wget \
|
|
gawk libc6-dev-i386 python-serial libexpat-dev
|
|
sudo mkdir /opt/Espressif
|
|
sudo chown $USER /opt/Espressif/
|
|
```
|
|
|
|
dependencies for x64
|
|
```
|
|
sudo apt-get install git autoconf build-essential gperf \
|
|
bison flex texinfo libtool libncurses5-dev wget \
|
|
gawk libc6-dev-amd64 python-serial libexpat-dev
|
|
sudo mkdir /opt/Espressif
|
|
sudo chown $USER /opt/Espressif/
|
|
```
|
|
|
|
crosstool-NG
|
|
```
|
|
cd /opt/Espressif
|
|
git clone -b lx106-g++-1.21.0 git://github.com/jcmvbkbc/crosstool-NG.git
|
|
cd crosstool-NG
|
|
./bootstrap && ./configure --prefix=`pwd` && make && make install
|
|
./ct-ng xtensa-lx106-elf
|
|
./ct-ng build
|
|
```
|
|
add path to environment file such as `.profile`
|
|
```
|
|
PATH=$PWD/builds/xtensa-lx106-elf/bin:$PATH
|
|
```
|
|
|
|
##### Espressif SDK: use Espressif official
|
|
|
|
```
|
|
cd /opt/Esprissif
|
|
git clone https://github.com/espressif/ESP8266_RTOS_SDK.git ESP8266_RTOS_SDK.git
|
|
ln -s ESP8266_RTOS_SDK.git ESP8266_SDK
|
|
cd ESP8266_SDK
|
|
git checkout -b jerry a2b413ad2996450fe2f173b6afab243f6e1249aa
|
|
```
|
|
|
|
We use SDK 1.2.0 version which has stdlib.h and others. Latest 1.3.0 version,
|
|
as of writing this document, doesn't have it.
|
|
(If anyone knows how to use latest version, please add an issue or send a PR.)
|
|
|
|
|
|
set two environment variables such as in .profile
|
|
```
|
|
export SDK_PATH=/opt/Espressif/ESP8266_SDK
|
|
export BIN_PATH=(to output folder path)
|
|
```
|
|
|
|
##### Xtensa libraries and headers:
|
|
```
|
|
cd /opt/Espressif/ESP8266_SDK
|
|
wget -O lib/libhal.a https://github.com/esp8266/esp8266-wiki/raw/master/libs/libhal.a
|
|
```
|
|
|
|
##### ESP image tool
|
|
```
|
|
cd /opt/Espressif
|
|
wget -O esptool_0.0.2-1_i386.deb https://github.com/esp8266/esp8266-wiki/raw/master/deb/esptool_0.0.2-1_i386.deb
|
|
sudo dpkg -i esptool_0.0.2-1_i386.deb
|
|
```
|
|
|
|
##### ESP upload tool
|
|
```
|
|
cd /opt/Espressif
|
|
git clone https://github.com/themadinventor/esptool esptool-py
|
|
sudo ln -s $PWD/esptool-py/esptool.py crosstool-NG/builds/xtensa-lx106-elf/bin/esptool.py
|
|
```
|
|
|
|
#### Test writing with Blinky example
|
|
|
|
##### Get the source
|
|
|
|
found one example that works with SDK V1.2 (which is based on FreeRTOS, as of writing)
|
|
|
|
* https://github.com/mattcallow/esp8266-sdk/tree/master/rtos_apps/01blinky
|
|
|
|
|
|
##### Compile
|
|
|
|
Read `2A-ESP8266__IOT_SDK_User_Manual_EN` document in
|
|
[this](http://bbs.espressif.com/viewtopic.php?f=51&t=1024) link.
|
|
|
|
It's configured 2048KB flash
|
|
```
|
|
BOOT=new APP=1 SPI_SPEED=80 SPI_MODE=QIO SPI_SIZE_MAP=5 make
|
|
BOOT=new APP=2 SPI_SPEED=80 SPI_MODE=QIO SPI_SIZE_MAP=5 make
|
|
```
|
|
|
|
or old way... this works not sure this is ok.
|
|
```
|
|
make BOOT=new APP=0 SPI_SPEED=80 SPI_MODE=QIO SPI_SIZE_MAP=2
|
|
```
|
|
|
|
##### Flashing
|
|
|
|
* power off ESP8266 board
|
|
* connect GPIO0 to GND, connect GPIO2 to VCC
|
|
* power on
|
|
* write
|
|
|
|
```
|
|
sudo /opt/Espressif/esptool-py/esptool.py \
|
|
--port /dev/ttyUSB0 write_flash \
|
|
0x00000 $SDK_PATH/bin/"boot_v1.4(b1).bin" \
|
|
0x01000 $BIN_PATH/upgrade/user1.2048.new.5.bin \
|
|
0x101000 $BIN_PATH/upgrade/user2.2048.new.5.bin \
|
|
0x3FE000 $SDK_PATH/bin/blank.bin \
|
|
0x3FC000 $SDK_PATH/bin/esp_init_data_default.bin
|
|
```
|
|
_change `/dev/ttyUSB1` to whatever you have._
|
|
|
|
or the old way...this works not sure this is ok.
|
|
```
|
|
cd $BIN_PATH
|
|
sudo /opt/Espressif/esptool-py/esptool.py \
|
|
--port /dev/ttyUSB0 write_flash \
|
|
0x00000 eagle.flash.bin 0x40000 eagle.irom0text.bin
|
|
```
|
|
|
|
* power off
|
|
* disconnect GPIO0 so that it is floating
|
|
* connect GPIO2 with serial of 470 Ohm + LED and to GND
|
|
* power On
|
|
|
|
LED should blink on and off every second
|